Introduction
Sky Observer for Raspberry Pi (Beta) is a low-cost and modular 1090ES ADS-B receiver, decoder and tracker software runs on Raspberry Pi.
Sky Observer can receive and process ADS-B & Mode-S messages from commercial or homemade ADS-B/Mode-S receiver hardware, extract flight information and make tracking. It can also output flight information in standard ASTERIX category 21 format and JSON format.
Sky Observer is designed to run 7x24, you can safely leave it runing and forget after first setting up.
ADS-B Message
Sky Observer is capable to process the following types of ADS-B messages.
| ADS-B Message Type | DO-260 | DO-260A | DO-260B |
|---|---|---|---|
| Airborne Position Message | YES | YES | YES |
| Surface Position Message | — | — | — |
| Aircraft Identity and Category Message | YES | YES | YES |
| Airborne Velocity Message (Ground) | YES | YES | YES |
| Airborne Velocity Message (Air) | — | — | — |
| Aircraft Status Message (Emergency) | YES | YES | YES |
| Aircraft Status Message | N/A | N/A | TBD |
| Target State and Status Message | N/A | YES | YES |
| Aircraft Operational Status Message (Airborne) | N/A | YES | YES |
| Aircraft Operational Status Message (Surface) | N/A | YES | YES |
Mode-S Message
Sky Observer is capable to process the following types of Mode-S messages.
| Downlink Format | Fields | Status |
|---|---|---|
| DF-0 | VS, AC, AP | YES |
| DF-4 | FS, DR, UM, AC, AP | YES |
| DF-5 | FS, DR, UM, ID, AP | YES |
| DF-11 | CA, AA, PI | YES |
| DF-16 | VS, AC, MV, AP | YES |
| DF-17 | CA, AA, ME, PI | YES |
| DF-18 | CF, AA, ME, PI | YES |
| DF-19 | AF, AA, ME, PI | YES |
| DF-20 | AC, MB, AP | YES |
| DF-21 | ID, MB, AP | YES |